On 24 Jun 21 23:17, Jesse C---- said the following to All:

issue has come up now when I start dbridge it immedatly sees some sort of caller and aborting the operation says aborting opperation however it launc the board anyways then after you hangup dbridge swapps back in and still sa aborting opperation and hangs there. timer runs still but program is stuck.

Is the CD indicator "grey" on the modem status bar when D'Bridge starts up?

If it is, then either the Fossil driver you're using or the modem-control
file is forcing the carrier-detect (CD) signal on or high, which is how the mailer determines a connection is established. Either make sure &C1 is part of the modem-init string in the modem control file or check the Fossil settings.

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

Is the CD indicator "grey" on the modem status bar when D'Bridge starts up

Yep

mailer determines a connection is established. Either make sure &C1 is par

I put a new init string in othermdm.mcf and got something like could not init the modem in the log screen.
I reverted the file and get the issue where dbridge loads goes to swap and I get that runtime error.

After playing around for a few I figured this much out..

Dbridge will loadup fine and swap to Iq fine (IF) you load nothing but the packetdriver X00 and RlFossil however with the modem unconfigured :|

With the modem configured you must have only the three things loaded up and load iniquity with rlfossil 1st let it init the modem then quit and load D'bridge. if you don't do that 1st you get that CD indicator seems like before DB has even had time to init the modem with &C1

Oh the good news is it works now just have to figure out this one issue or make a script to somehow init the modem before loading d'bridge.

othermdm.mcf has MCF 10009600
BAUD 9600
LOCKED
DELAY 40
PREINIT ATM0Q0V1X4&C1&D2
INIT v~~^~~ATS0=0H0
&etc

-lux
--- Renegade v1.25/DOS
* Origin: The Titantic BBS Telnet - ttb.rgbbs.info (1:129/305)

On 26 Jun 21 01:31:31, Jesse Cussins said the following to Nick Andre:

Oh the good news is it works now just have to figure out this one issue or make a script to somehow init the modem before loading d'bridge.

othermdm.mcf has MCF 10009600
BAUD 9600
LOCKED
DELAY 40
PREINIT ATM0Q0V1X4&C1&D2
INIT v~~^~~ATS0=0H0

I don't understand why you're using Preinit. You should only have INIT AT&C1&D2M0S0=0H0 as your init string. Whatever that "v~~~^~~~" is, it will not be parsed. It looks familiar... something copy-n-pasted from Renegade?

The MCF keyword is the basename of the MCF file. If the file you're using is Othermdm.mcf then it should be MCF OTHERMDM

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)