• JMS567 SATA 6Gb/s bridge & 64G msata TS64GMSA 370

    From Maurice Kinal@2:280/464.113 to Benny Pedersen on Thursday, February 21, 2019 21:57:11
    Hej Benny!

    Cutting and pasting for stats;

    # writing to onboard uSD card using dd
    dd if=/dev/zero of=test.dd bs=1M count=512
    512+0 records in
    512+0 records out
    536870912 bytes (537 MB, 512 MiB) copied, 58.4449 s, 9.2 MB/s

    # writing to usb connected msata using dd
    dd if=/dev/zero of=test.dd bs=1M count=512
    512+0 records in
    512+0 records out
    536870912 bytes (537 MB, 512 MiB) copied, 12.8056 s, 41.9 MB/s

    # writing to usb connected 2.5" laptop drive using dd
    dd if=/dev/zero of=test.dd bs=1M count=512
    512+0 records in
    512+0 records out
    536870912 bytes (537 MB, 512 MiB) copied, 12.9187 s, 41.6 MB/s

    Both the msata and the 2.5" laptop drive are 4 times faster than the uSD. However it should be noted that there is an issue with the usb sata bridge that

    states;

    [ 139.399549] usb 1-1.2: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
    [ 139.399569] usb 1-1.2: required by the UAS driver. Please try an other USB controller if you wish to use UAS.

    However it wasn't fatal as demonstrated by the dd write to the drive mounted on

    the JMS567 SATA 6Gb/s bridge, but after witnessing this I will continue to use the 2.5" laptop drive given that there are no such errors on there and the results were just as good. Hopefully newer raspberry pi's will ditch the uSD interface and put on a msata or m.2 controller/interface in the future. uSD's should be left to crippled hardware as people who use those devices don't seem to mind (over)paying for utter crap. ;-)

    I won't even mention the onboard wifi. More useless crap that is a drain on the system. :::sigh:::

    Anyhow, for the record, the same test on a usb3.0 interface;

    # writing to usb3 connected msata using dd
    dd if=/dev/zero of=test.dd bs=1M count=512
    512+0 records in
    512+0 records out
    536870912 bytes (537 MB, 512 MiB) copied, 1.13874 s, 471 MB/s

    MUCH BETTER!!! :-)

    Hopefully you'll have better results with the addon card. One thing for sure is that msata is a vast improvement over the onboard uSD and is worth the extra

    investment.

    Livet er godt,
    Maurice

    ... En Møøse slog engang min søster ...
    --- GNU bash, version 5.0.2(1)-release (aarch64-raspi3b+-linux-gnu)
    * Origin: Little Mikey's EuroPoint - Ladysmith BC, Canada (2:280/464.113)