1. Forum
  2. FidoNet
  3. RBERRYPI

  • Can I combine Pi-Hole, Router and WLAN-Access-Point...

    From F. W.@3:770/3 to All on Wednesday, October 05, 2022 10:57:50
    ...on one SD-Card?

    Thx

    FW

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Marco Moock@3:770/3 to All on Wednesday, October 05, 2022 12:29:47
    Am 05.10.2022 um 10:57:50 Uhr schrieb F. W.:

    ...on one SD-Card?

    It is possible to do it.

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From F. W.@3:770/3 to All on Monday, October 10, 2022 14:51:31
    Am 05.10.2022 um 12:29 schrieb Marco Moock:
    Am 05.10.2022 um 10:57:50 Uhr schrieb F. W.:

    ...on one SD-Card?

    It is possible to do it.


    How?

    All I know are systems that reside alone on the SD-Card.

    What can I use?

    Thanx

    FW

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Theo@3:770/3 to F. W. on Monday, October 10, 2022 15:33:10
    F. W. <me@home.com> wrote:
    How?

    All I know are systems that reside alone on the SD-Card.

    What can I use?

    I'd look at OpenWRT for the router and wifi functions, and install an adblocking module:
    https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi https://openwrt.org/docs/guide-user/services/ad-blocking

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Jim Jackson@3:770/3 to F. W. on Monday, October 10, 2022 15:36:30
    On 2022-10-10, F. W. <me@home.com> wrote:
    Am 05.10.2022 um 12:29 schrieb Marco Moock:
    Am 05.10.2022 um 10:57:50 Uhr schrieb F. W.:

    ...on one SD-Card?

    It is possible to do it.


    How?

    All I know are systems that reside alone on the SD-Card.

    What can I use?


    I just looked at the pi-hole homepage.

    Pi Hole is just an application that runs on one of its supported
    operating systems. One of which is PiOS.

    Install PiOS and Pi-hole, then install the applications needed to
    support WLAN Access point (google it). The kernel does routing, and a
    standard install has most of the command line programs you need to
    config the routing - but it sounds like you may need some handholding
    GUI to configure it - so install that.

    For something like this I never install any graphics support, and do
    everything from the command line.

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)