• Next hurdle

    From The Natural Philosopher@3:770/3 to All on Wednesday, October 18, 2023 19:48:32
    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the SD
    card inserted, and the root filesystem will not expand?

    There is something very flaky about all this USB boot.

    --
    "When a true genius appears in the world, you may know him by this sign,
    that the dunces are all in confederacy against him."

    Jonathan Swift.

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Jesper Kaas@3:770/3 to tnp@invalid.invalid on Thursday, October 19, 2023 07:29:06
    On Wed, 18 Oct 2023 19:48:32 +0100, The Natural Philosopher <tnp@invalid.invalid> wrote:

    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the SD
    card inserted, and the root filesystem will not expand?

    There is something very flaky about all this USB boot.

    Maybe you have one of the old Raspberry 4 models? https://www.pragmaticlinux.com/2021/12/directly-boot-your-raspberry-pi-4-from-a-usb-drive/

    "To configure your Raspberry PI 4 to boot from a USB drive, you just
    need to enable this feature inside the boot code, stored in EEPROM.
    And here’s the best part: Most Raspberry PI 4 boards enable this
    feature by default! Only a small batch of early Raspberry PI 4 boards
    shipped with this feature disabled."

    "What about older Raspberry PI models?

    This article primarily focuses on booting a Raspberry PI 4, 400 and
    Compute Module 4 from a USB drive. However, with a little trick, you
    can reap the same benefits if you own an older model such as a
    Raspberry PI 1, 2, 3 or Zero. The trick involves moving the root file
    system (/) to a USB drive and just leave the boot file system (\boot)
    on the SD card.

    With this approach, your Raspberry PI still boots from the SD card.
    However, the actual operating system itself runs from the USB drive.
    Since the boot operation only needs to reads from the SD card, you
    won’t run into SD card corruption problems. Just keep in mind that you
    get better disk I/O performance on a Raspberry PI 4, because it
    supports USB 3 ports. For step-by-step instructions on using this
    approach, refer to this tutorial:

    Move the Raspberry PI root file system to a USB drive

    What do you need

    To complete the steps outlined in this tutorial, you need the
    following:

    A basic Raspberry PI 4 setup. This includes a power supply, SD
    card, HDMI cable, monitor, mouse and keyboard.
    The Raspberry PI Imager software installed on your PC.
    A USB drive.

    Theoretically you can use a simple 4 GB or more USB flash stick for
    this tutorial. However, for the best performance I recommend a SATA or
    NVMe SSD drive with a suitable USB 3 adapter. For this tutorial, I’ll
    use a Samsung 860 EVO 250 GB SSD in combination with a Nedis USB 3.2
    2.5" SATA USB adapter. Note that not all SATA to USB 3 adapters fully
    work with the Raspberry PI 3. For more details and a potential fix,
    refer to article:

    Fix for getting your SSD working via USB 3 on your Raspberry
    PI..."
    --
    Jesper Kaas - jesperk@neindanke.online.no

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From The Natural Philosopher@3:770/3 to Jesper Kaas on Thursday, October 19, 2023 08:54:29
    On 19/10/2023 06:29, Jesper Kaas wrote:
    On Wed, 18 Oct 2023 19:48:32 +0100, The Natural Philosopher <tnp@invalid.invalid> wrote:

    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the SD
    card inserted, and the root filesystem will not expand?

    There is something very flaky about all this USB boot.

    Maybe you have one of the old Raspberry 4 models? https://www.pragmaticlinux.com/2021/12/directly-boot-your-raspberry-pi-4-from-a-usb-drive/

    Nope. Brand new 4B.
    I stumbled through the mirk, somewhat hampered by the fact that I
    interpreted the flashing green light as being some kind of malfunction,
    whereas I eventually discovered it was simply looking for an SD card
    that wasn't there, but still eventually booted.

    The key was to relabel the root FS and use that in fstab and in cmdline.txt
    And tell the green light to shut the f up.
    Then I finally got a clean boot and was able to expand the root FS to
    the whole SSD.

    The next issue is to find some 2TB SSDs that don't flatten the USB power supply.

    It looks like cheaper and slower is less power...

    --
    There is nothing a fleet of dispatchable nuclear power plants cannot do
    that cannot be done worse and more expensively and with higher carbon
    emissions and more adverse environmental impact by adding intermittent renewable energy.

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Another Dave@3:770/3 to The Natural Philosopher on Saturday, October 21, 2023 10:14:15
    On 18/10/2023 7:48 pm, The Natural Philosopher wrote:
    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the SD
    card inserted, and the root filesystem will not expand?

    There is something very flaky about all this USB boot.

    Probably not relevant but I've just spent the best part of an afternoon
    trying to get a 2Gb Pi4 to boot from an SSD via a USB3 (allegedly) to
    SSD adaptor.

    To save time I decided to use Raspberry Pi Imager (on a Mint desktop) to
    burn the image. It didn't work (write failure). I moved the SSD adaptor
    to a USB-2 port and it worked.

    If I plug the resulting combination into a USB-3 slot on the Pi 4 it
    boots perfectly.

    I think the adaptor works on the Pi USB-3 because the Pi 4 doesn't have
    true USB-3 data rates. I haven't got a Pi 5 but I suspect the same
    approach will not work.

    Another Dave
    --
    Change nospam to techie

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From The Natural Philosopher@3:770/3 to Another Dave on Saturday, October 21, 2023 10:58:15
    On 21/10/2023 10:14, Another Dave wrote:
    On 18/10/2023 7:48 pm, The Natural Philosopher wrote:
    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the SD
    card inserted, and the root filesystem will not expand?

    There is something very flaky about all this USB boot.

    Probably not relevant but I've just spent the best part of an afternoon trying to get a 2Gb Pi4 to boot from an SSD via a USB3 (allegedly) to
    SSD adaptor.

    To save time I decided to use Raspberry Pi Imager (on a Mint desktop) to
    burn the image. It didn't work (write failure). I moved the SSD adaptor
    to a USB-2 port and it worked.

    If I plug the resulting combination into a USB-3 slot on the Pi 4 it
    boots perfectly.

    I think the adaptor works on the Pi USB-3 because the Pi 4 doesn't have
    true USB-3 data rates. I haven't got a Pi 5 but I suspect the same
    approach will not work.

    Another Dave
    All SATA /SSD adapters are not created equal

    Allegedly.

    What does lsusb show about the adapter?

    PS Id I had known that a Pi4B would boot USB *by default* (if no SD card
    is installed) I wouldn't have faffed around with the SD card..

    --
    The New Left are the people they warned you about.

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From David Higton@3:770/3 to Another Dave on Saturday, October 21, 2023 11:30:38
    In message <uh04p7$1ln8m$1@dont-email.me>
    Another Dave <dmarsden@nospam.com> wrote:

    On 18/10/2023 7:48 pm, The Natural Philosopher wrote:
    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the SD
    card inserted, and the root filesystem will not expand?

    There is something very flaky about all this USB boot.

    Probably not relevant but I've just spent the best part of an afternoon trying to get a 2Gb Pi4 to boot from an SSD via a USB3 (allegedly) to SSD adaptor.

    To save time I decided to use Raspberry Pi Imager (on a Mint desktop) to
    burn the image. It didn't work (write failure). I moved the SSD adaptor to
    a USB-2 port and it worked.

    If I plug the resulting combination into a USB-3 slot on the Pi 4 it boots perfectly.

    I think the adaptor works on the Pi USB-3 because the Pi 4 doesn't have
    true USB-3 data rates. I haven't got a Pi 5 but I suspect the same
    approach will not work.

    The symptoms you describe would also fit perfectly with a power supply
    issue. Because of power limiting at USB ports, voltages at the USB
    devices can be marginal. This shows up most often with relatively
    high consumers of power, like storage drives.

    David

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From The Natural Philosopher@3:770/3 to David Higton on Saturday, October 21, 2023 11:45:10
    On 21/10/2023 11:30, David Higton wrote:
    In message <uh04p7$1ln8m$1@dont-email.me>
    Another Dave <dmarsden@nospam.com> wrote:

    On 18/10/2023 7:48 pm, The Natural Philosopher wrote:
    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the SD
    card inserted, and the root filesystem will not expand?

    There is something very flaky about all this USB boot.

    Probably not relevant but I've just spent the best part of an afternoon
    trying to get a 2Gb Pi4 to boot from an SSD via a USB3 (allegedly) to SSD >> adaptor.

    To save time I decided to use Raspberry Pi Imager (on a Mint desktop) to
    burn the image. It didn't work (write failure). I moved the SSD adaptor to >> a USB-2 port and it worked.

    If I plug the resulting combination into a USB-3 slot on the Pi 4 it boots >> perfectly.

    I think the adaptor works on the Pi USB-3 because the Pi 4 doesn't have
    true USB-3 data rates. I haven't got a Pi 5 but I suspect the same
    approach will not work.

    The symptoms you describe would also fit perfectly with a power supply
    issue. Because of power limiting at USB ports, voltages at the USB
    devices can be marginal. This shows up most often with relatively
    high consumers of power, like storage drives.

    That depends on the PC driving it. As far as a PI is concerned they have
    up to 6W of USB power available which is enough for the hungriest SSD,
    two reasonably abstemious ones and possible a third if small enough.

    We shall see.

    David

    --
    Truth welcomes investigation because truth knows investigation will lead
    to converts. It is deception that uses all the other techniques.

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Another Dave@3:770/3 to The Natural Philosopher on Saturday, October 21, 2023 14:39:04
    On 21/10/2023 10:58 am, The Natural Philosopher wrote:
    On 21/10/2023 10:14, Another Dave wrote:
    On 18/10/2023 7:48 pm, The Natural Philosopher wrote:
    OK, I changed the cmdline.txt to specify the USB UUID instead of
    PARTUUID and it seems to have partially booted correctly in that the
    right partitions end up mounted, but it STILL wont boot without the
    SD card inserted, and the root filesystem will not expand?


    What does lsusb show about the adapter?

    VIA Labs, Inc, VL711 SATA 6 Gb/s bridge

    PS Id I had known that a Pi4B would boot USB *by default* (if no SD card
    is installed) I wouldn't have faffed around with the SD card..

    I did know (but had forgotten) this as I had sorted it out when the Pi 4
    first came out. It was only when I got into the mire of PARTUUID and the
    rest that it dawned on me I was wasting my time and should bypass all
    attempts to use the live OS to copy the system to the SSD.

    Another Dave
    --
    Change nospam to techie

    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)